Convert 7-mode to CDoT on NetApp

by John C. Wray III Monday, September 22, 2014 5:48 AM

Clustered Ontap Change of Boot Loader

Stop the boot and go into the loader prompt.

LOADER-A>> setenv bootarg.init.boot_clustered true

LOADER-A> setenv bootarg.bsdportname e0M

LOADER-A> boot_ontap

Press CTRL-C to enter into the boot menu

Once in the boot menu select option 4 to Clean configuration and initialize all disks.

WARNING: This will erase your entire storage system, so unless you are doing this on a brand new system, a demo system, or an existing system that does not have any data on it, do not continue any further.



Storage | NetApp | 7-Mode | CDOT

Comments are closed